4 Tips to using a drum sander

man-78103_640

If you have a rather large sanding job that needs to get done in a short amount of time, it is a good idea to employ the use of a drum sander. If you have never used a drum sander before, this article will provide some great tips to help you understand the steps to using a drum sander. If you do not own a drum sander and are trying to determine whether or not you should invest in one, check out drum sander reviews as they will provide you with all that you need to know before you make a decision.

 

  • Be careful with the control lever. If you are sanding a floor, start near the corner of the room. This will help you work in a systematic manner. When you work from the corner of the room, you can ensure that you get all of the floor because you will be able to see the areas that have been completed and the areas that are still in need of attention. When you have the drum sander positioned and you are ready to go, lightly touch the control lever. It does not take much to get the sander started and it can catch you by surprise if you are not patient with the equipment. Keep in mind that while you are starting off in the corner, it is important that you don’t bump the wall as you can scuff it up badly by the sander.

 

  • Make sure to overlap your work. After you have completely sanded the floor, be sure to go over the flooring again with the sander. This second run through should not take as long now that you know what you are doing. In addition, you will be able to pick up any small spots that you missed or that were unable to get the right amount of sanding during the first pass through.

 

  • Go over your work to make sure it is perfect. After you have completed the sanding, make sure that you go over it with a fine tooth comb. What we mean here is that it is critical to take a good look at the flooring to make sure that the floorboards are even and that you didn’t miss any areas. Once you have made sure that your sanding is evenly distributed and you are completely satisfied with the sanding of your floor boards, you can move on to applying the finish. But first, you must clean up the remnants of dust and particles left over from sanding the wood.

 

Clean up the area before and after you start the job. Sanding wood can cause a large mess. The dust particles will get everywhere no matter how much you prepare for the job. Still, it is important to cover up furniture, countertops, cabinets and everything else that is left out in the open. By doing so, you can prevent some of the wood dust from getting on things that you don’t want to have to clean or tamper with.

Related Posts Plugin for WordPress, Blogger...