Houses are generally built to provide protection from water damage caused by floods. However, there will definitely be a time when the protection is breached and muddy water comes knocking on your doorstep. These are usually caused by waves of flash floods or accidental drainage leaks that we have no control of. And dealing with the aftermath of the water penetration in your home can really be a very messy task. Not only will you need to worry about cleaning and restoring the damaged area in your house, you will also have to worry about the dangerous health risks it might have brought with it. Fortunately, we have listed 3 tips below to help you fix the water damage in your home.
Before we get to the actual cleaning of the water damage, the very first thing you have to do is to assess the extent of the water damage and to ensure the safety of the household members. Everybody knows that water causes short circuits, therefore, be sure that you have turned off the power supply in the affected area after assessing the damage. All appliances must be removed and not used for the time being. Cut off the power supply and be sure that it is sealed for cleaning. After assessing and ensuring the safety, it is now time to start the cleaning process.
- The Manual Way – Buckets, Mops, Shovels, Rugs
After clearing the area of the furniture and the appliances, you can now start cleaning the area. Although, make sure that you are wearing protective gear such as gloves and boots. Flood water usually carries mud and other harmful substances that can cause skin irritation and even deadly diseases. So be sure that you are properly covered.
With the help of a shovel, remove and dispose of all of the mud that has entered into your house, so that it will be lighter once you use the bucket and the mop in removing the excess water. Slowly clean the area using buckets and pails to remove excess water and the mop to properly wipe the floor. Use the rugs for the hard to reach corners and on the walls. After cleaning the area, spray the whole area with clean water using the pressure from a hose to ensure that all harmful bacteria are washed away. And finally, you can start drying and eventually start restoring the area.
If you are dealing with a few feet of water penetration in your house, using buckets will take you a longer time and might even cause further damage to your floors and walls. The best way to deal with it by using water pumps. If you don’t have one then you can easily rent one from local shops for a few bucks. One thing to note though is that you need to be very meticulous in plugging the switches. Make sure that the extension wire is far away from the water. If possible, don’t let the wires touch the ground to avoid short circuits and causing additional damage.
- Getting professional help
If you don’t have the time and capability to clean the water damage yourself, you can consider getting a professional help. With today’s technology, getting a professional cleaning service for the water damage can be as easy as ordering take-out food. For example, if you are living in Dallas, you can browse the internet for local water damage Dallas cleaning companies and ask for a quick quote. It is important to note that you have to be careful in choosing the cleaning company as there are many scammers and low-quality service providers. Doing a quick background check or asking your friends for recommendations can surely help you cover your bases. Asking for a warranty can be a good idea too to ensure that you get your money’s worth.
And as a final tip, the most important thing you should remember in dealing with water damage is quick-reaction. Reacting quickly after water penetration will greatly minimize the damage which will eventually make the cleaning process easier and faster.